Active TopicsActive Topics  Display List of Forum MembersMemberlist  Search The ForumSearch  HelpHelp
  RegisterRegister  LoginLogin
The Cadet School
 U47.org Forum :: The Cadet School
Subject Topic: Memorial Granite Headstone Factories Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
Andysir
Matrose
Matrose


Joined: 28 July 2017
Online Status: Offline
Posts: 2
Posted: 19 September 2017 at 04:58 | IP Logged Quote Andysir

In the renovation of the rain soaked exterior wall, you can
wait for the external wall stone surface slightly dry, with
a strong penetration type
emulsion,http://www.jiahengstone.com/ stone curing agent,
you can brush more than once (at least 2 times). For water
containing spots of wet stone, can only be washed first,
then baking, and then brushing method, in order to conserve
treatment.http://www.jiahengstone.com/Angel-Headstones_c28
  
Water stone plaque is contained has deliquescent salt, the
deliquescent salt water will be absorbed in the air, caused
by the stone surface has obvious trace of wetness, no
matter what the weather is outside the transformation, do
not wet marks. When dealing with this kind of board,
because the stone surface is alkaline, acid cleaning agent
can be used to wash it to neutral. Then the stone surface
is forced to be quickly dried, and the solvent based fast
curing stone curing agent is used for curing. Such as the
use of ordinary stone curing agent for curing, because the
curing reaction is relatively slow (usually 24 hours),
before the curing reaction is not yet completed, salt and
alkali will continue to return. The solvent type fast
curing type stone curing agent curing reaction time is
quick, 15-40 minutes can achieve the maintenance effect,
and can effectively curb all kinds of salt again on the
stone surface,http://www.jiahengstone.com/Heart-
Headstones_c32 so as to achieve the long-term effect of
preventing water spots.
  
Wet stone stone drying with respect to maintenance and
construction, which has certain defects, protective layer
of dense mesh mesh protective layer curing agent in the wet
stone pores surface formed late in the dry stone pores
surface form, the protective effect is relatively weak, but
it can shorten the construction period and improve the
space utilization rate in the rainy season so, get a lot of
construction units acceptance.

Edited by Andysir on 19 September 2017 at 05:01


__________________
jiahengstone
Back to Top View Andysir's Profile Search for other posts by Andysir Visit Andysir's Homepage
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Powered by Web Wiz Forums version 7.9
Copyright ©2001-2004 Web Wiz Guide

This page was generated in 0.2803 seconds.